-14%
Enbio Pro 5,3L clase B
Enbio Pro 5,3L clase B - Image 2
Enbio Pro 5,3L clase B - Image 3
Enbio Pro 5,3L clase B - Image 4

DESIGNED IN SWITZERLAND · FDA REGISTERED

Enbio PRO Autoclave

A complete Class B sterilization cycle in as little as 9 minutes. Swiss-engineered, compact, and built for the pace of a modern beauty and medical studio.

Original price was: 7.300,00 $.Current price is: 6.300,00 $.

⚡ 9 min FAST  ·  🛡 15 min Wrapped Class B  ·  🌡 45 min Low-temp
🇨🇭 Swiss Engineering
✅ FDA Reg. 3016777357
🔌 Plugs into any outlet
💾 USB + my.enbio app

Three Cycles. One Machine.

Choose the right program for every load — from a rapid unwrapped turnaround to fully wrapped, validated Class B sterilization.
9 min

Unwrapped — FAST
273°F / 134°C

Fastest turnaround for unwrapped instruments between clients.
15 min

Wrapped — Class B
273°F / 134°C

Full Class B cycle for pouched, wrapped instruments ready for storage.
45 min

Wrapped — Class B
250°F / 121°C

Low-temperature program for heat-sensitive, wrapped materials.

Built for speed, sealed for safety

Class B in 9 minutes. The PRO runs a true fractionated-vacuum cycle, so even hollow and lumened instruments are reliably sterilized — at the speed a busy studio needs.

Compact footprint. Just 22.6 in wide and 7.9 in tall. Fits on a countertop where a traditional autoclave never would.

Plug-and-play. Works on any standard 110–120V outlet and an external water tank — no plumbing, no special wiring.

Documented every cycle. Process data writes automatically to USB and syncs with the my.enbio app for full traceability.

Everything you need, nothing you don't

🔌

Power Supply
Works with any typical electrical outlet.

💧

Water Supply
Uses distilled water from an external tank.

💾

Data Archiving
All process data written automatically to USB.

📱

Process Reports
Full control via the my.enbio app.

Up to 16 packages per load

A 5.3 L chamber with a load space of 11.2 × 7.5 × 2.8 in (28.5 × 18 × 7 cm) handles a full studio's instruments in a single run.

• Max. packages (circa): 16
• Max. recommended batch weight: 1.8 lb (0.8 kg)
• Process chamber volume: 5.3 L

Technical Specifications

Pressure & Temperature
Working pressure30.5 psi / 2.1 bar
Max. pressure33.4 psi / 2.45 bar
Max. process temperature278.6°F / 137°C
Electrical
Max. power supply110–120V / 60Hz
Nominal power3.25 kW
Max. power consumption15 A
Capacity
Max. packages (circa)16
Max. recommended batch weight1.8 lb (0.8 kg)
Process chamber volume5.3 L
Load space11.2 × 7.5 × 2.8 in
Dimensions & Misc.
Dimensions (W × D × H)22.6 × 10.6 × 7.9 in
Ingress protectionIP20
Data archivingUSB
Water conductivity*< 15 μS/cm
* Demineralized water only.

Trusted by professionals who can't compromise on hygiene

Nail technicians · Tattoo & PMU artists · Estheticians · Podiatrists · Medical & dental practices

Bring Swiss-grade sterilization to your studio

FDA registered. Designed in Switzerland. Ready to ship in the U.S.
Talk to an expert

Frequently Asked Questions

Its fastest program sterilizes unwrapped instruments in about 9 minutes at 273°F / 134°C. A full wrapped Class B cycle runs in roughly 15 minutes.

Yes. The PRO runs validated Class B cycles for wrapped, hollow, and porous loads using a fractionated-vacuum process.

No. It runs on any standard 110–120V / 60Hz outlet and draws distilled water from an external tank — no plumbing or special wiring required.

Every cycle's data is written automatically to a USB disk and can be tracked through the my.enbio app for full traceability.

Distilled / demineralized water only, with conductivity below 15 μS/cm.

Yes — FDA Establishment Registration Number 3016777357. Designed in Switzerland by Enbio Group AG; distributed in the U.S. by Enbio Corp. (Hoschton, GA).